-
Product
- HIGH-PERFORMANCE MACHINING CENTER
- HIGH SPEED AND HIGH PRECISION VERTICAL MACHINING CENTER
- HIGH-SPEED MOLD MACHINING CENTER
- HORIZONTAL MACHINING CENTER
- HIGH SPEED GANTRYMACHINING CENTER
- HIGH SPEED GANTRY MACHINING CENTER
- HEAVYGANTRYMACHINING CENTER (2 Linear guide 1 Hard guide)
- VERTICAL AND HORIZONTAL MACHINE CENTER
- Longmen Profile Processing Center
- ENGRAVING AND MILLING MACHINE
- FIVE AXIS MACHINING CENTER
- HIGH SPEED GANTRY MACHINING CENTER
- HIGH-PERFORMANCE MACHINING CENTER
- HIGH SPEED AND HIGH PRECISION VERTICAL MACHINING CENTER
- HIGH-SPEED MOLD MACHINING CENTER
- HORIZONTAL MACHINING CENTER
- HIGH SPEED GANTRYMACHINING CENTER
- HIGH SPEED GANTRY MACHINING CENTER
- HEAVYGANTRYMACHINING CENTER (2 Linear guide 1 Hard guide)
- VERTICAL AND HORIZONTAL MACHINE CENTER
- Longmen Profile Processing Center
- ENGRAVING AND MILLING MACHINE
- FIVE AXIS MACHINING CENTER
- HIGH SPEED GANTRY MACHINING CENTER
Longmen Profile Processing Center
Product introduction
The machine is a set of miling, driling,tapping, chamfering as one of the automatic composite machining center, suitable for processingvarious lengths of steel, copper, aluminum and other metal processing. Optional automatic chip extractor. BT30/BT40 spindle taper hole is optional, increasing the application range ofthe machine. Add machine protective cover to ensure operator safety and environmental health. Adopt sun type/disc type tool library for quick tool change. We can choose MITSUBISHI FANUC FANUC new generation SYNTEC and other well-known brand control system according to customerrequirements.
Machine parameter
| Type | G16 | G16L | G20 | G20L | ||||||
| Controller | SYNTEC MITSUBISHI | |||||||||
| Spindle motor power | 5.5KW | 11KW | 5.5KW | 11KW | ||||||
| Three axis motor power | 3×3(KW) | 3×3(KW) | 3×3(KW) | 3×3(KW) | ||||||
| Travel | ||||||||||
| Table horizontal travel(x) | 1600mm | 1600mm | 2000mm | 2000mm | ||||||
| Ram travel(Y) | 500mm | 500mm | 500mm | 500mm | ||||||
| Column horizontal travel (Z) | 300mm | 300mm | 300mm | 300mm | ||||||
| Spindle noseto the worktable | 150mm-450mm | 150mm-450mm | 150mm-450mm | 150mm-450mm | ||||||
| Linear guide | ||||||||||
| Orbit design | Three-axis roller | Three-axis roller | Three-axis roller | Three-axis roller | ||||||
| Track width | 45/35/35 | 45/35/35 | 45/35/35 | 45/35/35 | ||||||
| Number of sliders (X,Y,Z) | 4/8/4 | 4/8/4 | 4/8/4 | 4/8/4 | ||||||
| Screw diameter/pitch | X:Ø50/16mm Y:Ø40/16mm Z:Ø32/16mm | |||||||||
| spindle | ||||||||||
| spindle bore taper | BT30 | BT40 | BT30 | BT40 | ||||||
| Spindle diameter | Ø100 | Ø150 | Ø100 | Ø150 | ||||||
| Spindle speed (standard) | 20000rpm | Direct connection 10000rpm | 20000rpm | Direct connection 10000rpm | ||||||
| Spindle speed (optional) | 12000/15000rpm | Direct connection 12000rpm | 12000/15000rpm | Direct connection 12000rpm | ||||||
| feed | ||||||||||
| X Y Z fast feed | 24/36/36M/min | 24/36/36M/min | 18/36/36M/min | 18/36/36M/min | ||||||
| Minimum setunit of XYZ axis | 0.001 | 0.001 | 0.001 | 0.001 | ||||||
| cutting feed speed | 10M/min | 10M/min | 10M/min | 10M/min | ||||||
| Workbench | ||||||||||
| Table size | 1700*500mm | 1700*500mm | 2100*500mm | 2100*500mm | ||||||
| Tslot(width*number) | 5-18mm-100mm | 5-18mm-100mm | 5-18mm-100mm | 5-18mm-100mm | ||||||
| Maximum load | 600KG | 600KG | 600KG | 600KG | ||||||
| precision | ||||||||||
| Positioning accuracy(Jls6338) | 士0.005/300mm | 士0.005/300mm | 士0.005/300mm | 士0.005/300mm | ||||||
| Repeatability(Jls6338) | 士0.003 | 士0.003 | 士0.003 | 士0.003 | ||||||
| other | ||||||||||
| Net machineryweight (approx.) | 7500KG | 8500KG | 8000KG | 9000KG | ||||||
| Cutting coolant capacity | 130L | 130L | 130L | 130L | ||||||
| Lubricating oil tank capacity | 3L | 3L | 3L | 3L | ||||||
| Electricity demand | 25KVA | 25KVA | 25KVA | 25KVA | ||||||
| Pressure demand | 0.6MPA | 0.6MPA | 0.6MPA | 0.6MPA | ||||||
| Appearance size | 2800mm*2400mm*2800mm | 2800mm*2400mm*2800mm | 3200mm*2400mm*2800mm | 3200mm*2400mm*2800mm | ||||||
